Need help?

EN 848-1:2007+A2:2012 Standard

wave
Save  

  Keywords:

#note #document #hand #bench #machines

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Thursday 2nd of April 2020

  Description:

Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines

  Purpose

This document specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable hand fed single spindle vertical moulding machines (with or without demountable power feed unit), herein after referred to as "machines", designed to cut solid wood, chip board, fibreboard, plywood and also these materials if they are covered with plastic laminate or edgings when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines which are designed to work wood based materials may also be used for working hardened plastic materials with similar physical characteristics as wood. NOTE 1 For the definition of stationary and displaceable machine see 3.2.17 and 3.2.18. This document does not apply to: a) machines equipped with outboard bearings; b) machines equipped with powered movements of front extension table and/or tenoning sliding table; c) hand held woodworking machines or any adaptation permitting their use in a different mode, i.e. bench mounting; NOTE 2 Hand-held motor-operated electric tools are dealt with in EN 60745-1:2009 together with EN 60745-2-17:2010$. d) machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down; NOTE 3 Transportable motor-operated electric tools are dealt with in EN 61029-1:2009 together with EN 61029-2-8:2010$. This document is not applicable to hand fed single spindle vertical moulding machines which are manufactured before the date of its publication as EN. NOTE 4 Machines covered by this document are listed under 7 of Annex IV of the Machinery Directive.

  Publication

Thursday 30th of January 2020

  Cessation

This standard will be withdrawn on 2020-09-19

  Amendment

This standard is an amendment for "EN 848-1:2007"

  Related Standards

EN 1846-3:2013

Machinery (MD) Directive (2006/42/EC)

Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance

EN 12331:2003 +A2:2010

Machinery (MD) Directive (2006/42/EC)

Food processing machinery - Mincing machines - Safety and hygiene requirements

EN 12312-6:2017

Machinery (MD) Directive (2006/42/EC)

Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment

EN 12312-7:2005 +A1:2009

Machinery (MD) Directive (2006/42/EC)

Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment

EN 12312-8:2005 +A1:2009

Machinery (MD) Directive (2006/42/EC)

Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms

EN 12312-9:2013

Machinery (MD) Directive (2006/42/EC)

Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 848-1:2007+A2:2012 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0