Need help?

EN ISO 19085-7:2019 Standard

wave
Save  

  Keywords:

#thicknessing #displaceable #mode #hazards #cutterblock

This standard is superseded by:
  •   EN ISO 19085-7:2024 from: 2027-01-20
  •   Directive

    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Monday 7th of September 2026

      Description:

    Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019)

      Purpose

    This document gives the safety requirements and measures for stationary and displaceable -surface planing machines, also called jointers, -thickness planing machines, also called planers or single surface planers, -combined surface/thickness planing machines with fixed cutterblock position, with an integrated feed in thicknessing mode, with or without demountable power feed device in planing mode and with manual loading and unloading of the work-piece, hereinafter referred to as "machines". The machines are designed to cut solid wood and material with similar physical characteristics to wood. NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085-1:2017, 3.4 and 3.5. It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to these machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account. NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100. It is also applicable to surface planing machines and combined surface/thickness planing machines fitted with an optional mortising device, whose hazards have been dealt with. This document does not apply to: a) machines with more than one cutterblock; b) machines with mortising unit driven by a separate motor; c) machines where the cutterblock is adjustable for depth of cut setting in thicknessing mode; d) machines where the conversion from planing to thicknessing mode or vice versa is achieved by mounting or demounting parts/units; e) machines where surfacing and thicknessing can be performed on the same section of the cutterblock at the same time; f) machines intended for use in potentially explosive atmosphere; g) machines manufactured before the date of its publication as an international standard; h) displaceable machines with a maximum planing width of ≤330 mm. NOTE 3 Transportable motor-operated electric tools are dealt with in IEC 62841-1:2014 and IEC 61029-2-3:1993.

      Publication

    Thursday 2nd of April 2020

      Cessation

    This standard will be withdrawn on 2027-01-20

      Related Standards

    EN 15061:2007+A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Safety of machinery - Safety requirements for strip processing line machinery and equipment

    EN 1677-6:2001+A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Components for slings - Safety - Part 6: Links - Grade 4

    EN 1494:2000+A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Mobile or movable jacks and associated lifting equipment

    EN 1526:1997+A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Safety of industrial trucks - Additional requirements for automated functions on trucks

    EN 1550:1997+A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Machine-tools safety - Safety requirements for the design and construction of work holding chucks

    EN 1672-2:2005+A1:2009

    Machinery (MD) Directive (2006/42/EC)

    Food processing machinery - Basic concepts - Part 2: Hygiene requirements

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

    CLICK HERE TO GET TESTS AND INFO ON THE EN ISO 19085-7:2019 STANDARD

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0