Need help?

EN 12999:2020 Standard

wave
Save  

  Keywords:

#document #loader #designed #vehicles #equipment

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Wednesday 2nd of August 2023

  Description:

Cranes - Loader cranes

  Purpose

This document specifies minimum requirements for design, calculation, examinations and tests of hydraulic powered loader cranes and their mountings on vehicles or static foundations. This document applies to loader cranes designed to be installed on: - road vehicles, including trailers, with load carrying capability; - tractors (road or agricultural), where only a towed trailer has capability to carry goods; - demountable bodies to be carried by any of the above; - other types of carriers (e.g. separate loaders, crawlers, rail vehicles, non-seagoing vessels); - static foundations. This document also applies to loader cranes equipped with special tools or interchangeable equipment (e.g. grapple, clamshell bucket, pallet clamp, etc.), as specified in the operator’s manual. This document does not apply to loader cranes used on board sea going vessels or to articulated boom system cranes which are designed as total integral parts of special equipment such as forwarders. The hazards covered by this document are identified in Clause 4. This document does not cover hazards related to the lifting of persons. NOTE The use of cranes for lifting of persons can be subject to specific national regulations. This document is not applicable to loader cranes manufactured before the publication of this document. For loader cranes designed before the publication of this document, the provisions concerning stress calculations in the version of EN 12999 that was valid at the time of their design, are still applicable.

  Publication

Friday 15th of October 2021

  Related Standards

EN 16851:2017+A1:2020

Machinery (MD) Directive (2006/42/EC)

Cranes - Light crane systems

EN 289:2014

Machinery (MD) Directive (2006/42/EC)

Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements

EN 746-2:2010

Machinery (MD) Directive (2006/42/EC)

Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems

EN 690:2013

Machinery (MD) Directive (2006/42/EC)

Agricultural machinery - Manure spreaders - Safety

EN 609-1:2017

Machinery (MD) Directive (2006/42/EC)

Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters

EN 528:2008

Machinery (MD) Directive (2006/42/EC)

Rail dependent storage and retrieval equipment - Safety requirements

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 12999:2020 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0