Need help?

EN 1175:2020 Standard

wave
Save  

  Keywords:

#iso #safety #electrical #parts #document

This standard is superseded by:
  •   EN 1175:2025 from: 2027-01-20
  •   Directive

    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Monday 7th of September 2026

      Description:

    Safety of industrial trucks - Electrical/electronic requirements

      Purpose

    This document specifies the electrical requirements for the design and construction of the electrical installation in self-propelled industrial trucks that are within the scope of ISO 5053-1, except variable reach trucks as defined in ISO 5053-1:2015, 3.21 and 3.22, straddle carriers as defined in ISO 5053-1:2015, 3.18 and 3.19, and specific functions, parts and/or systems utilized for the automatic operation of driverless industrial trucks as defined in ISO 5053-1:2015, 3.32. It provides the electrical/electronic and safety-related parts of control system requirements for those self-propelled industrial trucks identified above to complete the requirements in the relevant part of the EN ISO 3691 and EN 16307 series of documents. NOTE 1 Reference is made to this document in other standards which cover the non-electrical requirements of the various industrial truck types. The requirements of this document are valid when trucks are operated under the following climatic conditions: - defined in the applicable parts of the EN ISO 3691 series and the EN 16307 series; - relative humidity in the range 30 % to 95 % (not condensing). This document deals with safety requirements for all electrical and electronic components of industrial trucks, including electrically actuated hydraulic/pneumatic valves. It specifies minimum performance levels required for safety functions realized by safety related parts of control systems. It is intended to be used to avoid or minimize hazards or hazardous situations listed in Annex I. These situations can arise during the operation in the area of use for which it is designed and during maintenance of trucks in accordance with the specifications and instruction given by the manufacturer. This document does not deal with hazards which could occur: a) during construction; b) when operating in potentially explosive atmospheres; c) because of malfunction of non-electric safety-related parts of control systems, e.g. hydraulic and pneumatic elements like pistons, non-electric valves, pumps etc. NOTE 2 The level of the defined required performance for electrical safety related control systems can be used as a guideline to determine the performance of non-electric systems. NOTE 3 Hazards due to penetration of water and dust are covered by the definition of PLr of safety functions, according to EN ISO 13849-1:2015.

      Publication

    Friday 15th of October 2021

      Cessation

    This standard will be withdrawn on 2027-01-20

      Related Standards

    EN ISO 9902-5:2001/A2:2014

    Machinery (MD) Directive (2006/42/EC)

    Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001)

    EN 60335-2-40:2003/A13:2012/AC:2013

    Machinery (MD) Directive (2006/42/EC)

    Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-condition...

    EN 60335-2-48:2003/A11:2012

    Machinery (MD) Directive (2006/42/EC)

    Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toa...

    EN 60335-2-48:2003/AC:2007

    Machinery (MD) Directive (2006/42/EC)

    Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toa...

    EN 60335-2-48:2003

    Machinery (MD) Directive (2006/42/EC)

    Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toa...

    EN 60335-2-47:2003/A11:2012

    Machinery (MD) Directive (2006/42/EC)

    Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

    CLICK HERE TO GET TESTS AND INFO ON THE EN 1175:2020 STANDARD

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0