Need help?

EN 50223:2010 Standard

wave
Save  

  Keywords:

#european #standard #hazards #stationary #category

This standard is superseded by:
  •   EN 50223:2015
  •   This standard is no longer addressed in the last official Journal publication of the "2025-08-13 ". This standard is addressed for the last time in the official journal publication of the "2018-03-09"

      Directive

    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Friday 9th of March 2018

      Description:

    Stationary electrostatic application equipment for ignitable flock material - Safety requirements

      Purpose

    1.1 This European Standard specifies requirements for automatic electrostatic flock application equipment which is used for applying ignitable flock which may form explosive atmospheres in the flock application area. In this connection a distinction is made between flock application devices which due to their type of construction comply with requirements as laid down in EN 50050:2001 as applicable, and those for which higher discharge energies are stipulated. This European Standard also specifies the constructional requirements for a safe operation of the stationary equipment of flock application booth, including the electrical installations. This European Standard deals with all significant hazards, hazardous situations and events relevant to flock application booths, when they are used as intended and under conditions foreseen by the manufacturer (see Clause 4). 1.2 This European Standard considers four types of electrostatic flock systems. For more details, see Table 1. 1.3 This European Standard deals with those hazards occurring during stationary automatic electrostatic flocking, when the work is carried out under the conditions given by the manufacturer. Among these hazards are, above all, ignition hazards of the generated explosive atmosphere and the personal protection. 1.4 The stationary equipment dealt with in this European Standard is considered to be equipment of group II, Category 2D or Category 3D for the use in areas with potential explosion hazards of zone 21 or 22. 1.5 In case of hybrid mixtures, the stationary equipment dealt with in this European Standard is also considered as equipment of group II, Category 2G or Category 3G for the use in areas with potential explosion hazard of zone 1 or 2. 1.6 This European Standard is not applicable for - flock systems operated with AC voltage, - the application system for liquid or pasty substances (e.g. adhesives, primer), - the cleaning of flock application booths, - the storage and handling of ignitable substances outside of the coating plant. 1.7 For constructive measures for noise reduction of stationary electrostatic coating plants for ignitable flock, see EN ISO 11688-1. See also EN 14462 "Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3".

      Publication

    Wednesday 20th of October 2010

      Cessation

    This standard has been withdrawn on 2018-04-13

      Related Standards

    EN ISO 4254-8:2018

    Machinery (MD) Directive (2006/42/EC)

    Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018)

    EN ISO 10218-2:2011

    Machinery (MD) Directive (2006/42/EC)

    Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)

    EN ISO 10472-6:2008

    Machinery (MD) Directive (2006/42/EC)

    Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)

    EN ISO 10472-5:2008

    Machinery (MD) Directive (2006/42/EC)

    Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)

    EN ISO 10472-4:2008

    Machinery (MD) Directive (2006/42/EC)

    Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)

    EN ISO 10472-3:2008

    Machinery (MD) Directive (2006/42/EC)

    Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997...

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

    CLICK HERE TO GET TESTS AND INFO ON THE EN 50223:2010 STANDARD

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0