Need help?

EN ISO 19085-15:2021 Standard

wave
Save  

  Keywords:

#presses #machine #hazards #gluing #part

This standard is superseded by:
  •   EN ISO 19085-15:2025 from: 2027-01-20
  •   Directive

    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Monday 7th of September 2026

      Description:

    Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2021)

      Purpose

    This part of ISO 19085 gives the safety requirements and measures for stationary manually loaded and unloaded: -  cold presses,-  hot presses,-  bending presses, -  edge/face gluing presses,-  membrane presses,-  embossing presses,where pressing force is applied by hydraulic actuators pushing two flat or shaped surfaces against each other, hereinafter referred to as "machines".It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also transport, assembly, dismantling, disabling and scrapping phases are taken into account.NOTE:  For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:-  Device for hot gluing-  Device for high frequency gluing-  Device for high frequency shaping-  Automatic work-piece loading and unloading system-  intermediate additional platens-  work-piece extractor-  work-piece clamping pressure beam-  split moveable platens.The machines are designed to process work-pieces consisting of:-  solid wood;-  materials with similar characteristics to wood (see ISO 19085-1:2017, 3.2);-  honeycomb.This part of ISO 19085 does not deal with any hazards related to:-  specific devices that differ from the list above;-  hot fluid heating systems internal to the machine other than electrical;-  any hot fluid heating systems external to the machine;-  operation of taking intermediate platens out and in again;-  the combination of a single machine being used with any other machine (as part of a line).It is not applicable to:-  frame presses;-  membrane presses where the pressing force is applied by vacuum only;-  presses for producing chipboard, fibreboard, OSB;-  machines intended for use in potentially explosive atmosphere;-  machines manufactured before the date of its publication as an international standard.

      Publication

    Wednesday 2nd of August 2023

      Cessation

    This standard will be withdrawn on 2027-01-20

      Related Standards

    EN 1034-26:2012

    Machinery (MD) Directive (2006/42/EC)

    Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll p...

    EN 13617-1:2021

    Machinery (MD) Directive (2006/42/EC)

    Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pu...

    EN 13448:2001+A1:2009

    Machinery (MD) Directive (2006/42/EC)

    Agricultural and forestry machinery - Inter-row mowing units - Safety

    EN 13457:2004+A1:2010

    Machinery (MD) Directive (2006/42/EC)

    Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying ma...

    EN 13531:2001+A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requiremen...

    EN 13534:2006+A1:2010

    Machinery (MD) Directive (2006/42/EC)

    Food processing machinery - Curing injection machines - Safety and hygiene requirements

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

    CLICK HERE TO GET TESTS AND INFO ON THE EN ISO 19085-15:2021 STANDARD

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0