Need help?

EN ISO 19085-17:2021 Standard

wave
Save  

  Keywords:

#workpiece #end #single #machine #integral

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Wednesday 2nd of August 2023

  Description:

Woodworking machines - Safety - Part 17: Edge banding machines fed by chains (ISO 19085-17:2021)

  Purpose

This document gives the safety requirements and measures for edge banding machines fed by chains or belts, with manual loading and unloading and maximum workpiece height capacity of 100 mm, capable of continuous production use, hereinafter referred as “machines”.It deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.The machines are designed to process in one pass one end (single-end machine) or both ends (double-end machine) of panels of:— materials with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2), even with a core sheet of aluminium light alloy;— gypsum plaster boards.Edges to be applied by the machine can be made of:— paper;— melamine;— plastic;— composite materials;— aluminium;— light alloy;— veneer;— solid wood.It is also applicable to machines fitted with one or more of the following devices/working units, whose hazards have been dealt with:— hot air banding unit;— laser banding unit;— infrared banding unit;— dynamic processing units;— sanding belt units;— milling unit installed out of the integral enclosure at the panel side on single-end machines;— milling unit installed out of the integral enclosure between machines halves of double-end machines;— additional fixed or movable workpiece support along the feed;— additional infeed workpiece support;— additional outfeed workpiece support;— in-feed device for transversal loading of panels in single-end machines;— intermediate workpiece support in double-end machines;— automatic panel returner in single-end machines;— automatic tool changing;— quick tool changing system;— automatic multiple edges infeed device;— workpiece heaters.This document does not deal with any hazards relating to:a) systems for loading and unloading of the workpiece to a single machine other than automatic panel returner and infeed and outfeed workpiece supports (e.g. robots);b) the combination of a single machine being used with other machines (as part of a line);c) workpiece dividing unit installed out of the integral enclosure and/or whose tools protrude out of the integral enclosure;d) plasma banding unit.It is not applicable to machines intended for use in potentially explosive atmosphere nor manufactured before the date of its publication.

  Publication

Wednesday 2nd of August 2023

  Related Standards

EN 1005-2:2003+A1:2008

Machinery (MD) Directive (2006/42/EC)

Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery

EN ISO 28881:2013/AC:2013

Machinery (MD) Directive (2006/42/EC)

Machine tools - Safety - Electro-discharge machines (ISO 28881:2013)

EN 61310-1:2008

Machinery (MD) Directive (2006/42/EC)

Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals

EN 60204-33:2011

Machinery (MD) Directive (2006/42/EC)

Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment

EN 60204-32:2008

Machinery (MD) Directive (2006/42/EC)

Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines

EN ISO 28927-12:2012

Machinery (MD) Directive (2006/42/EC)

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012)

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN ISO 19085-17:2021 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0