Need help?

EN 16486:2014 Standard

wave
Save  

  Keywords:

#equipment #european #compactors #standard #used

This standard can be totally or partially supervised by:
  •   EN 16486:2014+A1:2020
  •   This standard is no longer addressed in the last official Journal publication of the "2023-08-02 ". This standard is addressed for the last time in the official journal publication of the "2023-01-09"

      Directive

    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Monday 9th of January 2023

      Description:

    Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements

      Purpose

    This European Standard specifies the safety requirements for the design, manufacture and information for the safe use of compactors that compact waste material or recyclable fractions (e. g. paper, plastics, textiles, cans, cardboard, mixed waste), hereafter referred to as materials. This European Standard applies to: - compactors using a horizontally moving screw, pendulum or plate as compacting part and where the materials move horizontally; and - compactors that are mechanically fed and/or fed by hand. These compactors can be: - static compactors; - transportable compactors; - traversing systems. The scope includes: - any integral mechanical feed equipment (e.g. bin lift); - feed hoppers/openings; - any integral pre-conditioning equipment in the hopper (e.g. perforators, pre-crushing devices and shredders); - any integral material flow control equipment; - the interface between the compactor and any feed equipment (except those excluded from the scope). The scope of this European Standard does not cover: - compactors that are covered by EN 1501 (all parts); - underground compactors, however if these compactors can be used above ground this standard applies; - compactors using thermal technologies for compaction; - vacuum compactors; - compactors where materials are compacted vertically; - containers for static compactors, however the interface between the compaction unit and the container is included; - bins in which materials are collected for feeding into the compactor; - any up-stream pre-treatment equipment that is not integral to the machine and is used to treat the materials before they are fed into the feed opening of the compactor; - vehicles including lifting equipment used to collect and transport the compactor or container; - cranes, lift trucks or other transportable plant used to load materials into the feed hopper/opening and the hazards arising out of using this equipment to load; - any suction or dust control equipment. This European standard does not cover the lifting and transport of transportable compactors. This European Standard does not apply to hazards arising from the materials being processed (e.g. asbestos, clinical waste, aerosol containers). All hazards mentioned in Clause 4 are dealt with in this European Standard. This European Standard is not applicable for compactors which are manufactured before the date of its publication as an EN.

      Publication

    Friday 15th of January 2016

      Cessation

    This standard has been withdrawn on 2023-04-15

      Related Standards

    EN 1034-14:2005+A1:2009

    Machinery (MD) Directive (2006/42/EC)

    Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel s...

    EN ISO 3457:2008

    Machinery (MD) Directive (2006/42/EC)

    Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)

    EN ISO 8230-2:2008

    Machinery (MD) Directive (2006/42/EC)

    Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008)

    EN ISO 8230-1:2008

    Machinery (MD) Directive (2006/42/EC)

    Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)

    EN ISO 6683:2008

    Machinery (MD) Directive (2006/42/EC)

    Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)

    EN ISO 6682:2008

    Machinery (MD) Directive (2006/42/EC)

    Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

    CLICK HERE TO GET TESTS AND INFO ON THE EN 16486:2014 STANDARD

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0