Need help?

EN 14033-3:2009+A1:2011 Standard

wave
Save  

  Keywords:

#european #standard #intended #rail #track

This standard is superseded by:
  •   EN 14033-3:2017
  •   This standard is no longer addressed in the last official Journal publication of the "2023-08-02 ". This standard is addressed for the last time in the official journal publication of the "2018-03-09"

      Directive

    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Friday 9th of March 2018

      Description:

    Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements

      Purpose

    This European Standard specifies the significant hazards, hazardous situations and events, common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4. This European Standard applies to railbound machines and other vehicles - referred to as machines – working exclusively on the railway (utilising friction adhesion between the rail and rail wheels) but including machines that in working position are partly supported on the ballast or the formation and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex D. This European Standard specifies the common hazards, in normal circumstances, during running, assembly and installation, commissioning, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the machines. Additional safety measures can be required by exceptional circumstances, such as extreme ambient temperatures (less than – 20 °C or greater than + 40 °C), highly corrosive or contaminating environment; e.g. due to the presence of chemicals, and potentially explosive atmospheres. Air pressure caused by the passing of high-speed trains at more than 190 km/h is also not dealt with.

      Publication

    Wednesday 29th of February 2012

      Cessation

    This standard has been withdrawn on 2018-06-30

      Amendment

    This standard is an amendment for "EN 14033-3:2009"

      Related Standards

    EN 15811:2014

    Machinery (MD) Directive (2006/42/EC)

    Agricultural machinery - Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 2...

    EN ISO 5674:2009

    Machinery (MD) Directive (2006/42/EC)

    Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and a...

    EN ISO 11102-1:2009

    Machinery (MD) Directive (2006/42/EC)

    Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997)

    EN ISO 10821:2005/A1:2009

    Machinery (MD) Directive (2006/42/EC)

    Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005)

    EN ISO 10821:2005

    Machinery (MD) Directive (2006/42/EC)

    Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005)

    EN ISO 10218-2:2011

    Machinery (MD) Directive (2006/42/EC)

    Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

    CLICK HERE TO GET TESTS AND INFO ON THE EN 14033-3:2009+A1:2011 STANDARD

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0